The Campbell Hausfeld HS7101 is a two-stage, splash-lubricated, inline twin-cylinder pump and is used on many different branded units including Campbell Hausfeld, Husky and Speedaire. The HS7101 is made to mate to a min 5 HP electric motor and has a 80/20 duty cycle. The pump comes complete with the Flywheel and Air Filter. The HS7101 is a replacement for the older part number "HS050000AV". Installation is simple, just bolt it down, install the belt, add compressor oil and the discharge tube. However, this new pump is taller than the older HS7500 pump it replaces, and has a different bolt pattern. A solid, well-made pump that's a great value but if you should need them, we also sell replacement parts!
Air Compressor Pump - HS7101
Part Number: HS7101
Old Part Numbers: HS050000AV
Regular Price: $739.88
On Sale for $511.40
This pump fits the following compressors:
| Weight: | 115.00 lb |
| Length: | 24.20 in |
| Width: | 16.38 in |
| Height: | 22.69 in |
| Pkg Girth: | 110.16 in |
| CFM | 14cfm @ 90psi 13.7cfm @ 175psi |
| 1 or 2 stage | 2 |
|---|---|
| Head unloaders | No |
| Motor HP Min | 5 |
| Max Pressure | 175 |
| CFM | 13.7 CFM @ 175 PSI |
| Oil Bath/Oil Free | Oil bath |
| Flywheel size | 16.5" (?) |
| Pump material | Cast iron |
| Pump Weight | 115 |
| Dimensions L W H | 24.2" x 16.38" x 22.69" |
| Weight: | 115.00 lb |
| Length: | 24.20 in |
| Width: | 16.38 in |
| Height: | 22.69 in |
| Pkg Girth: | 110.16 in |
| CFM | 14cfm @ 90psi 13.7cfm @ 175psi |
| 1 or 2 stage | 2 |
|---|---|
| Head unloaders | No |
| Motor HP Min | 5 |
| Max Pressure | 175 |
| CFM | 13.7 CFM @ 175 PSI |
| Oil Bath/Oil Free | Oil bath |
| Flywheel size | 16.5" (?) |
| Pump material | Cast iron |
| Pump Weight | 115 |
| Dimensions L W H | 24.2" x 16.38" x 22.69" |
This pump fits the following compressors:
